Table of Contents
Advertisement
1. Place the left, the right and the rear legs ④ & ⑤ as
shown in the picture, and then fix the legs with the
M6x25 hexagon blots ③ and the washers ②, tighten
with a Hex key (not included).
2. Plug the wood dowel ⑥ into the rear leg ⑤.
3. Place the pedal leg ⑦ as shown in the picture, and then
fix the leg with the M6X40 hexagon bolts ⑧ and the
washers ②, tighten with a Hex key .
2
3
4
5
5
6
6
Setup
1
2
8
7
7
Advertisement
Table of Contents
