Chorus Level; Harmony Type; Harmonyspeed - Medeli AW GRAND 300 Owner's Manual

Chorus level
1.
Holding down [SHIFT] button, and then press [FUNCTION
button to select chorus level
Use [+/YES]/ [-/NO] or data dial to change chorus
Range: 0~127
2.
Press [+/YES] and [-/NO] simultaneously will set the chorus
to its default setting.
Note:
The default chorus level may be different for different voices.

Harmony Type

1.
Holding down [SHIFT] button, and then press [FUNCTION
button to select harmony type menu. LCD displays "xxx
Use [+/YES]/ [-/NO] or data dial to change harmony type.
The harmony types are as follows:
Number LCD Display
1 Duet
2 StandardTrio
3 Full Chord
4 Rock Duet
5 Country Duet
6 Country Trio
7 Block
8 4 Close 1
9 4 Close 2
10 4 Open
11 1+5
12 Octave
13 Strum
14 Echo
15 Tremolo
16 Trill
2.
Press [+/YES] and [-/NO] simultaneously will set harmony type to
default setting: Duet.
3.
When the harmony type is echo, tremolo or trill, the speed of
harmony effect note can be adjusted. Please refer to the harmony
speed setting.
4.
When the harmony type is strum, echo, tremolo or trill, the tempo
setting will also change the harmony note speed.
Harmony Speed
It will adjust the harmony effect speed for the harmony types: echo,
tremolo and trill.
1.
Holding down [SHIFT] button, and then press [FUNCTION
button to select harmony speed menu. LCD displays "xxx
HarmonySpeed". Use [+/YES]/ [-/NO] or data dial to change
harmony speed. Range: 1~4.
2.
Press [+/YES] and [-/NO] simultaneously will set the

HarmonySpeed

to its default setting:001.
menu. LCD displays "xxx ChorusLev".
level .
</> ]
level
</> ]
xxxx".
</> ]
Function Menu
ChorusLev
Duet
HarmonySpeed
25