Song Recording; Start Recording - Medeli AW GRAND 300 Owner's Manual

With the easy-to-use song recording features, you can record your own
keyboard performances as a user song. 10 user songs can be
recorded with 6 tracks (1 ACCOMP track, 5 MELODY tracks) each.
The accomp track records the accompaniment for a user song, while
the melody tracks record melodies for a user song.
An accomp track and a melody track can be recorded independently or
together, however, you can not record two melody tracks at the same
time.
You can play back the accomp track and melody tracks together. The
saved data will not be lost after power off.

Start Recording

Before recording starts, you need to select a user song to which your
recording will be saved.
1.
Holding down [SHIFT] button, and then press the [RECORD] button
to enter user song selection
"RecSong1" and sequence number.
Use the data dial, [+/YES] or [-/NO] button select the user song you
want.
2.
Holding down [SHIFT] button, and then press the [RECORD] button
again to enter recording standby mode. "REC" lights up,
beats start flashing.
The piano will automatically select an empty track to record your
performance. The selected track will flash on the bottom of LCD.
3.
In recording standby mode, you can select your desired voice, style
and tempo.
Holding down [SHIFT] button, then press
- [MELODY 5] to select a track. The selected track will flash on
LCD.
The accomp track and a melody track can be recorded together, but
it cannot record two melody tracks simultaneously.
4.
Press [START/STOP] button or play the keyboard to start recording.
When the accomp track is selected and A.B.C is on, recording will
start as soon as you play a chord in the left hand area.
Note:
Style can only be recorded in "ACCOMP" track.
Track indicators on LCD usually shows one of three states: blinking,
light up, light off. Press the track buttons repeatedly to shift between
different states.
Blinking: the track is selected for recording. All existing data will be
over-written.
Light up: the track has data and will play back the data during
recording.
Light off: the track either has no data or is under recording and cannot
play back.
In recording standby mode , the keyboard will automatically select the
empty track next to the occupied track. For example, if "Melody 1" is
occupied, then "Melody 2" will be selected as the record track. When
all 6 tracks have been recorded and a specific track needs to be
revised, press the button of that track and start recording. The original
data will be replaced.
interface. The LCD displays
and the
[ACCMOP] or [MELODY1]

Song Recording

RecSong1
RECORD ACCOMP MELODY 1 MELODY 2 MELODY 3 MELODY 4 MELODY 5
StGrdPno
RECORD ACCOMP MELODY 1 MELODY 2 MELODY 3 MELODY 4 MELODY 5
29