Auto-Connect Pairing - Adidas micoach User Manual

2.3.2 Auto-Connect Pairing

Auto-Connect paring involves pairing FIT SMART from the train & run app without putting the device into pairing mode. This pairing method requires your FIT SMART to have the
latest software and the train & run app to be up to date, see sections 2.3.1 Manual Pairing and 2.1.2 What else is needed for more.
1. Enable Bluetooth®
Turn on Bluetooth® in your
mobile device's settings.
*When FIT SMART is on/
awake it is advertising
its Bluetooth® signal.
2. Add FIT SMART 3. Turn on FIT SMART
ADD DEVICE
Select Device
FIT SMART
ADD
Open the miCoach train Ensure FIT SMART is on/
& run app, and add FIT awake by pressing the
SMART to the app under center button*
devices.
If your FIT SMART is not on or in range when your mobile device is searching for it, or has been paired with
another account an error message will be received on the train & run app. If you receive a pairing error
message more than once, a factory reset of FIT SMART may need to be performed. See section, 6.4.
4. Syncing 5. Pairing and Sync
Sync in Sync
progress completed
Your FIT SMART is paired and reday!
Once your mobile finds Once the initial pairing
FIT SMART, the app will and syncing is complete,
automatically begin your
syncing. automatically sync when
on and in range of your
mobile phone.
14
complete
FIT SMART
SUCCESS!
DONE
FIT SMART will