Pairing & Syncing - Adidas micoach User Manual

2.3 Pairing & Syncing
Pairing your FIT SMART with the miCoach train app can be done in two ways; with manual pairing and auto-connect paring. You can choose either method. If your FIT SMART is
showing the Bluetooth® pairing screen when first powered on, your device needs to be paired via the manual pairing method. If not, please continue to either pairing method.
Pairing
device like your FIT SMART to a Bluetooth®
Smart compatible and enabled mobile device.
Basically, it links your device with the app.
Synchronizing
workout data from your FIT SMART to the app and
transfers planned workouts and profile settings (time,
miCoach Zones, user profile etc.) to your FIT SMART.
is the process of connecting a Bluetooth®
(or Syncing) transfers completed
If you see this screen on your FIT SMART when it is powered on
for the first time, please go to section 2.3.1 Manual Pairing to
continue device setup. Your FIT SMART is running an older version
of software and an automatic software update will be triggered
during initial synchronization with the train & run app. Once the
software is updated, your FIT SMART can be paired in the future by
either pairing method.
Note: Do not pair the FIT SMART in your device's
Bluetooth® settings. If it is, please remove it as a paired
device and then follow pairing instructions with the
app. Pairing the FIT SMART directly to your device in its
Bluetooth® settings will not allow the miCoach train & run
app to establish a connection with your FIT SMART.
12