Local Printer Installation
!
You MUST install your printer as a Local Printer before
you perform any network installation.
During this part of your printer installation, you DO
NOT connect a cable between your printer and your
computer.
You are making an installation to a logical port, which
is done through software, not physical connections.
!
If you want to use the parallel port, you MUST remove
the Network Card from the printer. See the OkiLAN
6120e User's Guide for details.
|
36
Microline 320/321 Turbo/n
Installing Printer Software
Windows 95, 98, Me, NT4.0
1
With the OKI ML 320/321 Turbo/n CD in your CD-ROM
drive, click Start® Run.
2
Browse to your CD-ROM drive, then double-click
install.exe.
3
On the OKI Menu Installer main menu, click Printer
Software.
4
Make sure that at least the ML320/1 Tn Driver is
selected. Click Next.
5
Select Local Printer. Click Next.
6
Select LPT1. Click Next.
7
Click Finish.