Oki ML320Turbo User Manual page 75

Menu Settings Table (Continued)
For a complete explanation of each menu item, refer to "Using Your Printer, Menu Mode, Explanations of Menu Items."
The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in
bold italic. Some groups or entries will only appear when a specific emulation is engaged, as noted.
Group Item
Top Feed Line Spacing
Bottom Margin
Page Width (wide model only)
Page Length
Wait Time
Page Length Control
Set-Up Graphics
7 or 8 Bit Graphics*
Receive Buffer Size
Paper Out Override
Print Registration
* Appears only when the MICROLINE Standard emulation is selected.
Settings (Defaults are set in bold italic)
6 LPI, 8 LPI
Valid, Invalid
13.6", 8"
11", 11-2/3", 12", 14", 17", 3", 3.5", 4", 5.5", 6", 7", 8", 8.5"
500 ms, 1 sec, 2 sec
By MENU Setting, By Actual Page Length
Bi-directional, Uni-directional
8, 7
64K, 88 K, 1 Line, 32 K
No, Yes
0, set in 0.05 mm increments: press SEL to shift registration to the left;
press SHIFT + SEL to shift registration to the right.
|
User's Guide: English 75