Oki ML320Turbo User Manual page 31

7 Install the paper separator. Place the wire guide (1) on
the pull-up roller assembly (2).
1
8 Press FF/LOAD. The paper feeds into the printer.
!
The factory default setting for the Top of Form (where
the printing should begin) is one inch down from the top
of the page. To change the setting, see "Using Your
Printer, Top of Form (TOF)."
32T-31.eps
2
Top Feed (Single Sheets)
Use the single-sheet path for letterhead stationery, memos,
and individual envelopes.
!
If you have continuous-form paper in the path, press
PARK to remove it before loading single sheets.
1 Make sure the printer is on and deselected (SEL light
off).
2 Place the paper lever in the position marked "TOP."
3 Open the carriage cover. Raise the paper separator to the
single-sheet position.
32T-12.eps
32T-32.eps
User's Guide: English
|
31