Assembling The Recording Module And The Recording Extension Module - Panasonic Varicam 35 Operating Manual

Disassembling
1
Push down the recording module release lever (Fig. 2) while pulling up the lock knob (red) of the recording module release lever
(Fig. 1).
The rear part of the camera extension module will come up.
It will be difficult for the rear part to come up when heavy items such as batteries are mounted.
2
Lift the camera extension module.
3
Remove the upper lock angle in front of the camera extension module from the upper lock plate at the rear of the camera module.

Assembling the recording module and the recording extension module

1
Align the upper lock angle at the front of the recording module with the upper lock plate at the rear of the recording extension
module. (Fig. 1)
2
Firmly push in the recording module and connect the connection terminals of the recording extension module and recording
module. (Fig. 2)
@
NOTE
t You cannot join the modules together if the V edge of the recording extension module is down. (Fig. 3) Push down the recording extension module
release lever of the recording extension module to raise the V edge. (Fig. 4)
t Do not touch the mechanical parts near the V edge. The V edge will move quickly, which may cause injury.
Chapter 12 Extension module — Assembling Extension Modules
Fig. 1
Fig. 1
Fig. 3
Fig. 2
– 146 –
Fig. 2
Fig. 4