Using The Control Panel Extension Unit - Panasonic Varicam 35 Operating Manual

f Channel display
[1]/[2] or [3]/[4]
f Level meter display
Displays the level represented by 19 bars. (2 dB increments)
f Standard level bar
At the −18 dB position or the −20 dB position
The standard is in [MENU] → [SYSTEM SETTINGS] → [AUDIO LEVEL] → [HEADROOM]
6 Warning/error displays
: Warning (details are displayed on the time code display in the following cases)
f [SYSTEM ERROR !]
f [TURN POWER OFF !]
f [REC WARING !]
f [CARD ERROR !] (when recording has stopped)
f [LOW BATTERY !]
f [MEDIA END !]
: Alert
7 Time code display
f [TCG 12:59:59:20]: Displays the time code generator value.
f [TCR 12:59:59:20]: Displays the time code reader value.
f [UBG AB CD EF 98]: Displays the user bits generator value.
f [UBR AB CD EF 98]: Indicates the user bits reader value.
f [Dur.00:59:59:23]: Displays the duration.
8 [USER CLIP NAME]/[TYPE3] display
Displays the CAM INDEX, REEL number, and clip number.
9 Lock display/network status display
Displayed when button operations are disabled due to the <LOCK> switch.
: Displays the network connection status.

Using the control panel extension unit

The control panel can still be used after it is removed. To remove the control panel, set the <POWER> button to <OFF>.
1
Press the <RELEASE> switch while lifting up the control panel. (Fig. 1)
The control panel will come off.
2
Attach the control panel extension unit. (Fig. 2)
3
Connect the control panel extension unit cable to the control panel. (Fig. 3)
Chapter 5 Control Panel — Control panel operation
Fig. 1
Fig. 3
– 52 –
Fig. 2