Printing On Reverse Side; Setting Up The Printer Driver For Printing On Reverse; Side - Oki DP-5000 User Manual

perature see your computer's reference manual
for details.
Note 1:
Some monitors do not allow the colour temperature to
be changed. In this case, open
Control Panels and set the
White Gamma, which provides a colour temperature
similar to D50.
Note 2:
Once you have completed steps 1 through 3, you
should not need to repeat them unless you wish to
change the settings.
4. Prepare print data and set up the paper for print-
ing. Select from the
Print
Note:
The contents of the Print dialogue box depend on the
application software. If the colour setting options
RGB, CMYK, or others are available in the dialogue
box, select the RGB option. If you select the CMY
option, the printed output will differ from the colours
displayed on the monitor.
5. To enable the ColorSync function during printing.
Click the Image..
to display the Colours dialogue box. Select
Chapter 4 - Installation and Operation, Macintosh
Monitor & Sound
option to
Gamma Page-
menu.
File
button in the Print dialogue box
ColorSync
After the settings have been completed, click
Note:
When printing a photograph, it is advisable to turn on
in the
Darker Black
then be smoothed because black will be expressed by
all four colours .
6. After returning to the Print dialogue box, click
to start printing.
Print

Printing on reverse side

The DP-5000 printer has a special option for printing on
the reverse side of paper. The
option skips the paper curl reforming process for best
printing results.
Setting up the printer driver for printing on
reverse side
1. In the application you want to print with, select
Page Setup
Setup dialogue box.
2. Make any necessary changes to the settings in the
Page Setup dialogue box.
from the
Colour Matching
option. The darkness graduation will
Print On Reverse Side
from the menu to open the Page
File
English
options.
OK.
39