Replacing Or Changing Ink Cartridges - Oki DP-5000 User Manual

Caution 2:
You must leave at least one cartridge holder empty for the
printer to operate properly. Do not install more than 7 ink
cartridges.

Replacing or changing ink cartridges

When you want to change ink cartridges or replace a
cartridge whose ribbon has been used up, remove the
cartridges by the following steps.
Note 1:
When an ink cartridge has been used up, black and sil-
ver stripes will be visible on the ribbon.
Note 2:
To reverse a Finish II or Econo Black ink cartridge, flip
the cartridge over and manually advance the ribbon
until the black and silver stripes (1) disappear.
1. Open the front cover by pushing the front cover
release button.
16
1
2. Removing an ink cartridge is similar to installing
it. Hold the centre of the cartridge with your
thumb and index finger. Push the left latch on the
ink cartridge holder slightly to the left with the
cartridge.
3. Lift up the right side of the cartridge, and then
remove the entire ink cartridge. Insert a new ink
cartridge by following the steps described earlier.
User's Guide