The printer automatically adjusts color balance and
density at appropriate intervals, optimizing the printed
output for bright white paper viewed in natural daylight
conditions. The items on this menu provide a means of
changing the default settings for special or particularly
difficult print jobs. Settings revert to their default values
when the next print job is complete.
Note:
Factory default settings are shown in
Item
DENSITY
CONTROL
AUTO DENSITY
COLOR TUNING PRINT
Color Menu
Settings
AUTO
MANUAL
EXECUTE
PATTERN
Menu Functions • 43
NOTE
Explanation
AUTO = image density is automatically
adjusted:
• at power on
• when a new image drum or toner
cartridge is installed
• at intervals of 100, 300 and 500 drum
counts
Auto adjustment takes up to 55
seconds.
Switch to manual only if you wish to
initiate Density Control manually using
the printer menu.
Selecting this will perform the auto
density set up.
Prints the pattern for the user to
manually adjust TRC. Ordinarily this
function is not needed because TRC is
automatically adjusted. See "Setting
Color Tuning from The Front Panel" on
page 66.
.
bold