Oki C5400 User Manual page 130

Printing is slow.
Possible cause
Print resolution is
set high.
Data is too complex. Simplify data.
Printer requests paper size change to continue printing.
Possible cause
Paper loaded in tray is
different size from that
formatted in software
application.
The power is on, but the printer does not go online.
Possible cause
Bad connection
Print processing does not start.
Possible cause
Printer error
Print processing cancels.
Possible cause
The printer interface
cable is faulty.
The time out setting is
too short.
Remedy
Set lower print resolution in the printer d6
Remedy
Either change paper in tray to match size
formatted in application and press
continue, or continue printing on existing paper by
ON-LINE
pressing
Remedy
Switch off the printer and disconnect the power
cable. Reconnect the power cable and switch the
printer on. If this does not clear the fault, call for
service.
Remedy
Check the control panel. If an error message is
displayed, correct the problem.
Remedy
Replace the printer interface cable.
Reset time out in the menu to a higher value
(
SYS CONFIG MENU
Troubleshooting • 128
ON-LINE
.
→
WAIT TIMEOUT
to
).