Oki C5300n User Manual page 51

7. The project window will display one .BIN file for each printer
file added. Make a careful note of the name and ID number for
each of the files. You will need them later.
If you wish to edit the names or ID numbers, double-click the
file entry and edit the details. Volume details are as follows:
0 = printer's disk drive PCL partition;
1 = printer's disk drive Common partition;
%disk0% = printer's disk drive PostScript partition;
2 = flash memory PCL
%Flash0% = flash memory PostScript
The names are case sensitive, and will be needed later exactly as they
appear in this list.
8. Choose Projects→Save Project and enter a meaningful name
(e.g. "Letter Stationery") so that you can recognise it.
9. Choose Projects→Send Project Files to Printer to download
the project to the printer.
10. When the message "Command Issued" appears confirming
that the download is complete, click OK to clear the message.
Test printing the macro
1. Choose Printers→Test Macro.
2. In the Test Macro window, enter its ID number and click OK.
After a short pause the printer will print the macro.
3. When each macro has been tested, click Exit.
4. Click the standard Windows Close (X) button, or choose
Projects→Exit to close Storage Device Manager.
Step 3: Defining overlays
This is the final step before the new overlays are ready for use.
1. Open the Printers window via the Start menu or the Windows
Control Panel.
NOTE
WINDOWS 9X DIFFERENCES > 51