Proof And Print Feature; Sending The Document To Print - Oki C5300n User Manual

Proof and print feature

This feature allows you to send multiple copies of a document to print
but only print the first copy so that you can check the output quality
before printing the rest.
With both PS and PCL drivers, this feature requires the optional internal
hard disk to be fitted and enabled in the Start/Settings/Printers/
Properties/Device options dialogue.

SENDING THE DOCUMENT TO PRINT

From your application's Print dialogue, select the number of copies
you need, and then click the Properties button.
1. In the driver window, on
the Job Options tab, select
Proof and Print (1).
2. In the small pop-up
window which appears,
enter a name for this print
job (16 characters
maximum) and a 4-digit
PIN using any combination
of digits from 0 to 9, and
click OK.
3. Click OK again to close the
driver window, and again to close your application's Print
dialogue.
The document will be sent to the printer's hard disk but only the first
copy will print.
See Chapter "Printer Settings in Windows" for information on printing
the remaining copies.
NOTE
WINDOWS 9X DIFFERENCES > 37
1