Tcp/Ip Connection - Oki C5300n User Manual

Restart your computer if prompted to do so.
1. In the Apple menu, select Chooser.
2. In the left-hand side of the Chooser window, select the
LaserWriter printer driver that you use.
3. If you are on a network with multiple AppleTalk zones, select
the appropriate zone for the printer in the bottom left side of
the Chooser. If your network does not have multiple AppleTalk
zones, this option will not be visible.
4. Click Create; the Chooser tries to locate the printer on the
network, and tries to select the appropriate PPD (PostScript
Printer Description) file.
The correct PPD should be discovered automatically, and installable
hardware options are detected and configured as appropriate. If the
correct PPD cannot be located automatically, you will be asked to
manually select a file.
If the printer cannot be discovered by the Chooser, it is most likely a
connection problem.
5. Close .

TCP/IP CONNECTION

The printer can be connected over TCP/IP using LPR.
LPR is simply a method of printing directly over TCP/IP, without the
need for a print server.
This installation procedure uses Apple's Desktop Printer Utility to
connect the printer to your Mac. You cannot connect to a printer over
TCP/IP using the Chooser.
NOTE
NOTE
MAC OS 9.X / CLASSIC > 56