Adjusting Windows Printer Drivers; Pcl Driver - Oki C5300n User Manual

ADJUSTING WINDOWS PRINTER DRIVERS

Once your new upgrade has been installed, you may need to update
the Windows printer driver so that the additional features are
available to your Windows applications.
Remember that if your printer is shared between users on different
computers, the driver must be adjusted on each user's machine.
The illustrations shown here are for Windows XP. Other Windows
versions may appear slightly different, but the principles are the
same.

PCL DRIVER

If you have installed a memory upgrade it is not necessary to change
the PCL printer driver, and you can ignore this section.
If you have installed a duplex unit or hard disk, proceed as follows:
1. Open the Printers window (called
"Printers and Faxes" in
Windows XP) via the Start Menu or
from the Windows Control Panel.
2. Right-click the printer icon for this
printer, and choose Properties
from the pop-up menu.
3. On the Device Options tab, check
the box for the upgrade you have
just installed.
4. Click OK to close the properties window, and then close the
Printers window.
INSTALLING UPGRADES > 191