Manual Pc Adjustment - Sanyo PLC-XD2200 Owner's Manual

Computer Input
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The
projector has five independent memory areas to store those parameters manually adjusted. It allows you to
recall the setting for a specific computer.
1
Press the MENU button to display the On-Screen
Menu. Use the Point
and then press the Point
2
Use the Point
and then press the SELECT button to display the
adjustment dialog box. Use the Point
adjust the setting value.
Fine sync
Use the Point
◄►
flicker from the image displayed (from 0 to 31).
Total dots
Use the Point
◄►
in one horizontal period to match your PC image.
Horizontal
Use the Point
◄►
position.
Vertical
Use the Point
◄►
position.
Current mode
Press the SELECT button to show H-sync freq . and V-sync
freq . of the connected computer.
Clamp
Use the Point
◄►
the image has dark bars, try this adjustment.
Display area H
Use the Point
displayed by this projector.
Display area V
Use the Point
displayed by this projector.
0
Downloaded From projector-manual.com Sanyo Manuals

Manual PC Adjustment

buttons to select PC adjust
▲▼
or the SELECT button.
►
buttons to select the desired item
▲▼
buttons to adjust the value, eliminating a
buttons to adjust the number of total dots
buttons to adjust the horizontal picture
buttons to adjust the vertical picture
buttons to adjust the clamp level. When
buttons to adjust the horizontal area
◄►
buttons to adjust the vertical area
◄►
PC adjust Menu
buttons to
◄►
Auto PC adj.
Fine sync
►
Total dots
Horizontal
Vertical
Current mode
Clamp
Display area H
Display area V
Reset
Mode free
Store
Auto PC adj.
Fine sync
Total dots
Horizontal
Vertical
Current mode
Clamp
Display area H
Display area V
Reset
Mode free
Store
0
1365
0
0
0
1024
768
0
1365
0
0
0
1024
768
►