Input Source Selection (Component, Rgb Scart 21-Pin) - Sanyo PLC-XD2200 Owner's Manual

Input Source Selection (Component, RGB Scart 21-pin)

Choose Computer 1(Component) or Computer 1(Scart) by pressing the COMPONENT or the COMPUTER 1
button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
Remote Control
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point
then press the Point

Use the Point
RGB(Scart) and then press the SELECT button.
Component
RGB (Scart)
✔Note:
When the Input Search function is set to On1 or On2,
the input signal will be searched automatically (p.44).
Downloaded From projector-manual.com Sanyo Manuals
Direct Operation
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
COMPONENT button
Computer 1(Component)
Menu Operation
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Computer 1 and
▲▼
button.
►
buttons to select Component or
▲▼
When the input source is coming from video
equipment connected to the COMPUTER
IN 1/S-VIDEO IN/COMPONENT IN terminal
with a Component-VGA Cable, select
Component.
When the input source is coming from video
equipment connected to the COMPUTER
IN 1/S-VIDEO IN/COMPONENT IN terminal
with a Scart-VGA Cable, select RGB
(Scart).
Input Menu
S-video
Video Input
7