Zoom And Focus Adjustment; Auto Setup Function; Keystone Correction - Sanyo PLC-XD2200 Owner's Manual

Hide thumbs Also See for PLC-XD2200:

Service manual (114 pages)

Owner's manual (78 pages)

Manual (71 pages)

Table Of Contents

Table of Contents

Rotate the Zoom Ring to zoom in and out.

Rotate the Focus Ring to adjust the focus of the image.

Auto setup function is provided to automatically execute the

setting of Auto setup (includes Input search, Auto PC adj.

and Auto Keystone functions) in the setting menu by just

pressing the AUTO SETUP button on the top control or the

AUTO SET button on the remote control. Refer to page 44

for the setting of the Auto setup function.

✔Notes:

• Auto Keystone corrects vertical distortion only; it does

not correct horizontal distortion.

• Auto Keystone cannot work when Ceiling feature is set

to On in the Setting menu (p.49).

• Perfect correction of the image distortion cannot be

ensured with the Auto setup function. If the distortion

cannot be corrected properly by pressing the AUTO

SETUP or AUTO SET button, adjust manually by

pressing the KEYSTONE button on the remote control

or selecting Keystone in the Setting menu (p.45).

• Fine sync, Total dots, Horizontal and Vertical

position of some computers cannot be fully adjusted

with the Auto PC Adjustment function. When the image

is not provided properly with this operation, manual

adjustments are required (pp.30-31).

If a projected picture still has keystone distortion after

pressing the AUTO SETUP button on the top control or the

AUTO SET button on the remote control, correct the image

manually as follows:

Press the KEYSTONE button on the remote control. The

Keystone dialog box appears. Use the Point

correct keystone distortion. The keystone adjustment can be

stored (see page 45).

Reduce the upper width

with the Point

Downloaded From projector-manual.com Sanyo Manuals