1
Press the MENU button to display the On-Screen
Menu. Use the Point
adjust and then press the Point
button.
2
Use the Point
and then press the SELECT button to display the
adjustment dialog box. Use the Point
adjust the setting value.
Contrast
Press the Point
Point
button to increase the contrast (from 0 to 63).
►
Brightness
Press the Point
the Point
button to increase the brightness (from 0 to 63).
►
Color temp .
Use the Point
◄►
level (XLow, Low, Mid, or High).
white balance (Red)
Press the Point
◄
button to deepen red tone (from 0 to 63).
►
white balance (Green)
Press the Point
Point
button to deepen green tone (from 0 to 63).
►
white balance (Blue)
Press the Point
Point
button to deepen blue tone (from 0 to 63).
►
Sharpness
Press the Point
image; press the Point
of the image (from 0 to 15).
Gamma
Use the Point
obtain a better balance of contrast (from 0 to 15).
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.
Downloaded From projector-manual.com Sanyo Manuals
buttons to select Image
▲▼
or the SELECT
►
buttons select the desired item
▲▼
button to decrease the contrast; press the
◄
button to decrease the brightness; press
◄
buttons to select the desired Color temp.
button to lighten red tone; press the Point
button to lighten green tone; press the
◄
button to lighten blue tone; press the
◄
button to decrease the sharpness of the
◄
button to increase the sharpness
►
buttons to adjust the gamma value to
◄►
Image Adjustment
Image Adjust Menu
buttons to
◄►
✔Note:
Computer Input
Selected Image mode
Use the Point
buttons to adjust the
setting value.
• When White balance Red, Green or Blue is
adjusted, Color temp . will change to User.
• When Blackboard(Green) or Colorboard
is selected in Image select, Color temp . will
change to Blackboard or Colorboard.
◄►