Konica Minolta BIZHUB C203 User Manual page 94

3
Setting
Center Staple/Fold
Output Tray
Center Staple & Fold
Staple
Punch
The following procedures describe how to select Finishing settings.
Reminder
The Staple settings are available only if the optional finisher is installed.
The Punch settings are available only if the punch kit is installed on the optional finisher.
3-54
Downloaded From ManualsPrinter.com Manuals
Description
Select this setting to fold copies. The copies
can also be bound with staples at the same
time.
The "Center Staple/Fold" setting can be
used if the saddle stitcher is installed on op-
tional finisher FS-519.
Select the output tray where the finished copies are to be fed.
Select this setting to fold the printed copies
and bound them with staples before feeding
them out.
The "Center Staple & Fold" setting can be
used if the optional finisher FS-609 is in-
stalled.
Select one of these settings to bind the cop-
ies with a staple in the corner or with two
staples.
Holes are punched (4 holes) in the copies for
filing them.
Copy Operations
bizhub C353/C253/C203 (FE2)