Konica Minolta BIZHUB C203 User Manual page 104

3
–
3
Touch [Position Setting].
–
–
–
–
–
4
If desired, touch [Original Direction], and then select the setting appropriate for the original.
5
Touch [OK].
The Basic screen appears again.
3-64
Downloaded From ManualsPrinter.com Manuals
To cancel the Punch setting, touch [None].
Select the punched hole position, and then touch [OK].
Touch [Auto] to automatically determine the position of the punched holes according to the
orientation of the loaded original. If the original length is 297 mm or less, the holes are punched
along the long side of the paper. If the original length is more than 297 mm, the holes are punched
along the short side of the paper.
If "Auto" is selected for the stapling position, load the original with the top toward the back of the
machine. If the original is loaded in any other orientation, the stapling will not be correctly
positioned.
If "Auto" is selected, the punched hole position is set at the top or at the left.
To cancel the setting and select the default, press the [Reset] key.
Copy Operations
bizhub C353/C253/C203 (FE2)