Connecting An Interface Cable - Oki B6200 Series Setup Manual

CONNECTING AN INTERFACE CABLE

Connect the interface cable to be used to the printer.
Connect a USB cable only after the printer driver has been installed on the
computer.
1. Connect the interface cable to the interface connector at the back
of the printer: serial (1), USB (2), network (3), parallel (4).
For a parallel cable, lift up the wire clip on both sides to secure it
after it has been inserted into the connector.
2. For Parallel, USB, or Serial cables, connect the other end of the
cable to the interface connector of the computer.
38 > INSTALLATION AND RELOCATION PROCEDURE
NOTE