Selecting The Control Panel Language - Oki B6200 Series Setup Manual

SELECTING THE CONTROL PANEL LANGUAGE

English is the default language for all error and status messages; however,
these messages are also available in many languages. Use the following
procedure to change the display language.
Refer to the section "The Control Panel and Menu system" on page 43
brief overview of the control panel and its menus and sub-menus.
1. Press the <MENU> button to display the Menu screen.
2. Press the < > or < > button until [Display Language] is
displayed, then press the < > button.
3. Press the < > or < > button until the required language is
displayed, then press the <FEED/SELECT> button.
4. Press the <MENU> button to complete the language setting.
INSTALLATION AND RELOCATION PROCEDURE > 45
NOTE
for a