Preparations; Connecting Interface Cable - Oki LD670 User Manual

No printer cable is provided with the product. Obtain a printer cable suitable for
the product interface. If you have any questions, consult your dealer. Before
connecting or disconnecting cables, make sure of the following:
1) The power to the printer and all other devices connected to the printer
is turned off.
2) The AC adapter power cable has been unplugged from the outlet.

4-1. Connecting Interface Cable

Open the connector cover at the rear of the printer by pulling it up, and connect
the interface cable to its rear connector socket. Close the cover after connecting
the cable.
Note: If cables are arranged so that they extend from the rear or from the rear on
the right side, remove the inserts in the connector cover or the cover with
nippers or a similar tool. Unless the inserts are removed in this case, the
cables may be damaged and cause a failure.

4. Preparations

23