If Paper Jams - Oki B6200 Series Setup Manual

Oki printer setup guide
Hide thumbs Also See for B6200 Series:
Table of Contents

Advertisement

IF PAPER JAMS

When removing jammed paper, make sure that no pieces of torn paper are
left in the machine. A piece of paper remaining in the machine can cause a
fire. If a sheet of paper is wrapped around the heat roller, or when clearing
a jammed paper that is difficult or impossible to see, do not try to remove
it by yourself. Doing so may cause injuries or burns. Switch off the
machine immediately, and contact your Oki dealer.
Guided by the message on the control panel, open the cover and remove
the jammed paper. If paper is torn, check for any remaining torn pieces of
paper.
The fuser unit gets hot when operating. Avoid touching it.
The covers and trays are identified in the following diagram:
Cover A: When the optional offset catch tray is installed, fold the tray first
before opening cover A. When a message to remove the drum-toner
cartridge is displayed, refer to
CAUTION!
CAUTION!
"Inside Cover A" on page
56 > IF PAPER JAMS
58.

Advertisement

Table of Contents
loading

Table of Contents