Automatic Rinse/Cleaning Cycle - Saeco Grand Baristo User Manual

ENGLISH
16
RINSING
AQUACLEAN 0/8
ACTIVATE
WATER FILTER?
(~2 MINUTES)

Automatic Rinse/Cleaning Cycle

When warm-up has been completed, the machine automatically performs
a rinse/self-cleaning cycle of the internal circuits with fresh water. This
takes less than a minute.
1 Place a container under the coff ee dispensing spout to catch the small
amount of water which will be dispensed.
2
This display is shown. Wait for the cycle to fi nish automatically.
Note:
To stop dispensing, press the "
3
When the operations described above have been completed, the
machine shows this display. The display shows this icon to indicate that
the AquaClean fi lter must be installed.
Note:
For further information on the fi lter and how to install it, please refer to the
"AquaClean Water Filter" chapter. If you wish to install it later, press the "
button and move on to the manual rinse cycle.
Note:
The " " icon is only displayed if your machine is equipped with a Bluetooth
interface and if you have enabled it.
" button.
"