Measuring And Programming Water Hardness - Saeco Grand Baristo User Manual

ENGLISH
20
PROFILE SAECO

MEASURING AND PROGRAMMING WATER HARDNESS

Measuring water hardness is very important in order to defi ne the descal-
ing frequency and to install the "AquaClean" water fi lter (for more details on
the water fi lter, see next chapter).
To measure water hardness, follow the steps below:
1
Immerse the water hardness test strip (supplied with the machine) in
water for 1 second.
Note:
The test strip can only be used for one single measurement.
2 Wait for one minute.
3
Check how many squares have changed to red, then consult this table.
Note:
The numbers on the water hardness test strip correspond to the water
hardness adjustment settings.
More precisely:
1 = 1 (very soft water)
2 = 2 (soft water)
3 = 3 (hard water)
4 = 4 (very hard water)
The letters correspond to the references that are located at the base of the
"AquaClean" water fi lter (see next chapter).
4
Press the " " button to access the machine main menu.