Sync - Grundig GCA-B3323V Owner's Manual

AREA SEL [1/8 ~ 8/8] :
Here you can select the setting for each of the 8 mask areas. If MONITOR AREA in the
MOTION DET menu has been set to ON, four areas will be selected.
- TOP: Sets the top side of the selected mask area.
- BOTTOM: Sets the bottom side of the selected mask area.
- LEFT: Sets the left side of the selected mask area.
- RIGHT: Sets the right side of the selected mask area.
COLOR [1~8] :
Choose one of 8 colours for the mask areas.
TRANSP [0.00, 0.5, 0.75, 1.0] :
Choose one of 4 transparency levels for the mask areas.
MOSAIC [OFF, ON] :
Set the mosaic function for the mask areas to OFF or ON. The mosaic will be shown in
the mask areas when TRANSP is set to lower than 1.00.

6.12. SYNC

This camera model is set to fixed INT (Internal Syncronisation).
6.13. LANGUAGE
The camera supports 7 different languages. Select your preferred language from the list.
6.14. CAMERA RESET
All the settings will be restored to factory default.
6.15. NEXT / BACK
When you select NEXT, the second main menu page will be shown. When you select
BACK, the first main menu page will be shown.
6.16. EXIT
Exits the menu without saving any changes in the settings.
6.17. SAVE ALL
Saves the changes in the settings.
20 English