Osd Menu - Grundig GCA-B3323V Owner's Manual

6. OSD Menu

1. Press the SET key and hold it for a while to access the menu mode.
2. Select the desired feature by using the UP/DOWN keys (/\ \/) on the control.
3. If there is a setting for this feature on the the right side of the screen, use the
LEFT/RIGHT keys to switch between the settings and confirm your choice by pressing
the SET key. If an ENTER arrow (↵) is displayed, press SET to access the according
submenu.
4. When the settings are completed, go to SAVE ALL and press the SET key to save the
settings. If you have not done this and the power is turned off, the changes in the
settings will not be kept.
5. In the sub-menus, please press with the SET key on RETURN to return to the
previous menu.
6. To exit the menu, please press with the SET key on EXIT in the main menu.
NR: This noise reduction function is to decrease the noise which can be generated
under low light conditions.
ATR: This function is used to improve the contrast of the image (similar to WDR).
BACKLIGHT: You can control the backlight compensation here.
NEXT: Choose this option to view the second menu page.
10
LENS: Here you can configure the lens
setting.
SHUTTER/AGC: This function is used to
control the light exposure.
WHITE BAL: You can control the white
balance under different lighting conditions
here.
PICT ADJUST: You can set different picture
related settings like mirroring, brightness,
contrast, hue and gain.
English