White Bal (White Balance) - Grundig GCA-B3323V Owner's Manual

6.3. WHITE BAL (White Balance)

This function is used to control the white balance under different lighting conditions.
Adjusting the setting calibrates the camera for correct and natural colour rendering.
Adjust the functions PUSH, ANTI CR, PUSH LOCK or select a submenu (MANUAL,
ATW, USER1, USER2).
- SPEED [000~255] : Sets the speed of searching for White Balance when the colour
temperature changed.
- DELAY CNT [00~255] : This sets the delay time of searching for White Balance, when
the colour temperature changed.
- ATW FRAME [x0.5, x1.0, x1,5, x2.0] : Adjust ATW by increasing or decreasing the
colour temperature is possible.
- ENVIRONMENT [INDOOR, OUTDOOR] : Choose INDOOR when the camera is
installed indoors (this is mainly for sodium vapor lamps or indoor lighting conditions, it
means ATW is set to Low Colour Temperature/warm) or choose OUTDOOR when the
camera is installed outdoors (this is mainly for sunlight conditions, it means ATW is set
to High Colour Temperature/cool).
MANUAL:
Here you can set the SHUTTER value and
the AGC value.
- MODE [SHUTTER+AGC] : The mode is
fixed to SHUTTER+AGC.
- SHUTTER [NTSC: 1/60, 1/100, 1/250,
1/500, 1/1000, 1/2000, 1/4000, 1/1000;
PAL: 1/50, 1/120, 1/250 ~ 1/10000] :
Choose the desired value.
- AGC [6.00, 12.00, 18.00, 24.00, 30.00,
36.00, 42.00, 44.80] : As the AGC value
increases, the overall screen gets brighter
but the level of noise is also increasing.
ATW:
In this mode, the camera automatically
tracks changes in the colour temperature,
and adjusts the white balance according to
the ambient conditions.
English 13