Camera Id; Day/Night - Grundig GCA-B3323V Owner's Manual

6.8. CAMERA ID

Programming the Camera ID:
1. Turn on the CAMERA ID mode and enter the submenu.
2. Using the four direction keys, switch between the characters. Press the SET key to
make a desired figure.
3. Press CLR if you need to delete letters.

6.9. DAY/NIGHT

This function is used to improve the camera's sensitivity at night or when the brigthness
level of the ambient environment is low.
- BURST: Set this option to ON to output a burst signal in B/W mode.
- DELAY CNT: Sets the delay time for switching between COLOR and B/W mode.
- DAY→NIGHT: Sets the brightness level for switching from COLOR to B/W mode.
- NIGHT→DAY: Sets the brightness level for switching from B/W to COLOR mode.
COLOR:
If set to COLOR, the camera will be fixed to COLOR mode regardless of the ambient
conditions.
This menu is used to assign a unique name
to a camera. You can enter up to 52
alphanumeric or special characters for the
CAMERA ID. Select POS and press the
SET key to be able to move the display
position of the CAMERA ID.
AUTO [BURST, DELAY CNT,
DAY→NIGHT, NIGHT→DAY] :
This mode automatically switches the video
signals between COLOR and B/W when the
according ambient illumination/brightness is
reached.
English 17