Privacy - Grundig GCA-B3323V Owner's Manual

- ENABLE: If the BLOCK DISPLAY is set to ON, you can choose in this setting with the
SET key areas where the motion detection (in block format) should not be displayed.
Using this option is only possible when MONITOR AREA is set to ON. To exit this
setting, press the SET key and hold it for a while.
MONITOR AREA [OFF, ON] :
If you choose ON, the areas for motion detection monitoring will be shown on the screen.
AREA SEL [1/4 ~ 4/4] :
Here you can select the setting for each monitoring area.
- TOP: Sets the top side of the selected monitoring area.
- BOTTOM: Sets the bottom side of the selected monitoring area.
- LEFT: Sets the left side of the selected monitoring area.
- RIGHT: Sets the right side of the selected monitoring area.

6.11. PRIVACY

DETECT SENSE [000~127] :
Sets the motion detection sensitivity.
BLOCK DISP [OFF, ON, ENABLE] :
Controls the ON/OFF status of the motion
detection block display.
- ON, OFF: Turns the block display on/off.
When selecting ON, a submenu will appear
where you can set the privacy masks and
their colours. This function is used to mask
specific areas within the frame of the
camera.
English 19