Motion Det (Motion Detection) - Grundig GCA-B3323V Owner's Manual

- BURST: Set this option to ON to output a burst signal in B/W mode.
- IR OPTIMIZER: Set the IR OPTIMIZER to ON to control the screen overexposure
caused by the camera's bright LED light in dark ambient conditions.
- MODE: Choose CENTER if the subjects which can cause overexposure are located
near the centre of the monitored area. Choose AUTO if the subjects which can cause
overexposure are scattered on the monitored area.
- LEVEL: Sets the reference level of the IR OPTIMIZER. If the value is too high, the
screen may be overexposed.
EXT1:
This option enables auto switching between COLOR and B/W mode using the
brightness level detected by the photocell.
NOTE: Setting the EXT1 option in DAY/NIGHT mode is highly recommended.
EXT2:
Not available.

6.10. MOTION DET (Motion Detection)

This function is used to detect moving objects in the monitored area. There are 4
predefined boxes representing the areas that can be monitored for motion.
18
B/W [BURST, IR OPTIMIZER, MODE,
LEVEL] :
If set to B/W, the camera will be fixed to
B/W mode regardless of the ambient
conditions.
English