Side Table Assembly - Smoke hollow LS2016-2B Owner's Manual

4-Burner Model
Step 1:
Attach Manifold assembly as
shown to the Control Panel using
(4) M4 x .31 Bolts. Attach Control
Knobs making sure flat side
matches up.
Step 2:
Attach Control Panel to Front
side of Barrel Base with
/
(4) 5 "–30 x.31" bolts.
32
NOTE: Start these two screws first allowing for
about a 1/4" of space so that the Tables can
slide onto and stabilize for assembly.
Grill Assembly

8. Side Table Assembly

Instructions:
Start the top two screws on the outside of the Barrel Base so that the Side
Tables can slide onto and rest upon them. Then attach the two inside screws
through the Barrel Base into the Side Tables. Screw the remaining two screws
through the Side Table brackets into the Barrel Base. Finish by tightening all
loose screws.
14
Locate:
• Control Panel
• (4) Control Knobs
• Manifold Assembly
• (8) M4 x .31 Bolts
/
5
• (4) "–30 x.31" bolts
32
• (1) ¼"–20 x 1.65" bolts
• (1) ¼"–20 Nut
Step 3:
Attach Manifold Assembly
Bracket to the left front
side of Cart Frame with (1)
¼"–20 x 1.65" bolt and (1)
¼" –20 Nut.
Locate:
• Left Side Burner Table
• Right Side Table
• (12) ¼"–20 x .59" bolts
Side Burner Version