Side Burner Assembly - Smoke hollow DG850C Manual

Assembly
Fig. 13A
G
1
Fig. 13B
Fig. 13D
A
Fig. 13E
A
G
Fig. 13C
A
13

Side Burner Assembly

2
Hardware needed:
Attach the side burner control panel to the side burner
shelf assembly using (3) M4x8 bolts as shown. (Fig.
13A)
G
Unscrew (2) preinstalled bolts from the side burner tube
as shown. (Fig. 13B)
Remove side burner grate and side burner from the side
burner shelf as shown. (Fig. 13C)
Hardware needed:
Attach (1) M6x12 bolt to the left of the cabinet as
shown, but do not tighten bolt. (Fig. 13D)
Hang the side burner shelf assembly on bolt and push
side burner shelf assembly down.
Attach upper part of side burner shelf assembly to
cabinet using (2) M6x12 bolts. (Fig. 13E)
Attach side burner shelf and side burner control panel
assembly to left rear leg #3 and left front leg #4 using
(3) M6x12 bolts. (Fig. 13F)
Note: When screwing the bolt to the left front leg
#4, attach match holder and chain by inserting the
(1) M6x12 bolt through the loop of the chain and
securely tighten.
Tighten bolt pre-assembled on Fig.13D.
Fig. 13F
A
G
x3
A
x6
A
A
16
13