Download Print this page

Troubleshooting - Motorola HTN9005 Series Manual

Multi-unit chargers
Hide thumbs Also See for HTN9005 Series:

Advertisement

3. When the battery is properly seated in the pocket, the
charger LED will light red to indicate that the battery is
charging rapidly. When the battery is 90% charged,
the LED will begin to flash green to indicate that the
battery is trickle charging. When the battery is fully
charged, the LED will change to a steady green light.
Note
Even though new batteries might prematurely
:
indicate a full charge (steady green LED), charge the
battery for 14 to 16 hours prior to initial use for best
performance.
Batteries will charge best at room temperature.

TROUBLESHOOTING

When troubleshooting, always observe the color of
the LED:
Table 2. LED Indications of Battery/Charger Status
LED Color
No LED indication Battery is inserted incorrectly.
Single flash green Successful charger power-up
Flashing red
Steady red
Flashing yellow
Flashing green
Steady green
Battery/Charger Status
Battery is unchargeable or not
making proper contact.
Battery is in rapid-charge mode.
Battery is in charger, not in
rapid-charge mode, but waiting
to be charged.
Battery is charged (to 90% or
greater capacity).
Battery is fully charged.
6

Advertisement

loading