Advertisement
POWER SOURCES/POWER PLUGS
Contact your Motorola representative for the
applicable power cord kit (power plug) for your power
source application.
OPERATING INSTRUCTIONS
Multi-unit chargers will charge only the Motorola
authorized batteries listed in Table 1. Other batteries
may not charge.
Multi-unit chargers can charge up to six of the
batteries (in any combination) listed in Table 1. Each
of the six battery charger pockets will accommodate
either a radio with a battery attached, or a battery
alone. Prior to charging a battery with radio, turn
the radio off.
Note: The chargers are powered by an auto-ranging,
switching power supply. The power supply will operate
on input source voltage between 90 and 265 Vac.
To charge a battery, refer to Figure 1 (page 5) and
use the following procedure:
1. Plug the power cord into an appropriate ac outlet. The
LED of each of the six charger pockets will flash green
once to indicate a successful power-up of that pocket.
4
Advertisement
