Buell 2006 P3 Service Manual page 323

HOME
DISASSEMBLY
NOTE
As the transmission runs, each part develops a certain wear
pattern and a kind of "set" with its mating parts. For this rea-
son, it is important that each component be reinstalled in its
original location and facing its original direction.
1. See Figure 6-31. As each component is removed, place
it on a clean surface in the exact order of removal.
a0127x6x
12
11
1. Bearing (inner)
2. Fifth gear mainshaft
3. Bearing (outer)
4. Oil seal
5. Right crankcase half
6. Ball bearing
6-22 2006 Buell P3: Drive/Transmission
10
9
8
Figure 6-32. Transmission Assembly Right Crankcase Half
b0948x6x
Figure 6-31. Recording The Order of Disassembly
7
6
7. Retaining ring
8. Quad seal
9. Spacer
10. Oil seal
11. Bearing (closed end) shifter drum
12. Bearing (closed end) countershaft
5
4
3
2
1