Body Panel Care/Maintenance - Buell 2006 P3 Service Manual

HOME

BODY PANEL CARE/MAINTENANCE

GENERAL
Molded-in-color surfaces look like painted surfaces, but are
not. The color pigment is mixed in with the material when the
part is made, not applied over the surface. Molded-in-color
panels require different maintenance than painted surfaces to
maintain their original shine. Using methods that work on
painted surfaces may ruin the finish of molded-in-color parts.
CAUTION
Use of abrasive products or powered buffing equipment
will cause permanent cosmetic damage to molded-in-
color body panels. Use only recommended products and
techniques outlined in this manual to avoid damaging
molded-in-color body panels. (00245a)
IMPORTANT NOTE
Do not use touch-up paint on molded-in-color panels.
RECOMMENDED PRODUCTS
Products recommended for the proper care and maintenance
of molded-in-color body panels are available at your Buell
dealer and are listed below:
Harley Wash (Part No. 99715-90) or Harley Sun Wash
(Part No. 94659-98).
Harley Gloss (Part No. 94627-98).
Harley Glaze Polish and Sealant (Part No. 99701-84).
Harley Swirl and Scratch Treatment (Part No. 94655-98).
Harley Softcloth (Part No. 94656-98).
CARE AND MAINTENANCE
Decals
NOTE
The body panels on Blast P3 Models are shipped from the
factory untreated and ready for decal application.
If Personal F/X decals are to be applied to molded-in-color
body panels, they must be applied to the original, untreated
surface for proper adhesion. If Harley Glaze Polish and Seal-
ant or similar product has been applied to the panels, the
decal will not adhere properly. Apply wax and grease
remover, such as Dupont Prep-Sol, to treated panels to
remove Harley Glaze prior to applying decals for best results.
Prep-Sol is available at most automotive aftermarket dealers.
Follow instructions on product for proper usage. Follow
instructions provided with decals for proper application. Prep-
Sol will not affect molded-in-color panels. If you are unsure of
how to use this product, see your Buell dealer.
Washing
To wash molded-in-color panels follow the instructions below:
1. Rinse surface with water.
2. Wash with Harley Wash or Harley Sun Wash.
3. Rinse surface thoroughly with water.
4. Dry with a clean chamois or soft dry natural fiber cloth.
Cleaning Between Washings
Untreated molded-in-color body panels sometimes have a
static charge that attracts dust. Applying Harley Gloss or Har-
ley Glaze Polish and Sealant to molded-in-color surfaces will
eliminate this condition.
To keep a high gloss finish on molded-in-color panels
between washings, follow the instructions below:
Spray Harley Gloss onto surface and wipe with a clean soft
natural fiber cloth or Harley Softcloth.
NOTE
Rain or water will remove Harley Gloss from body panels.
Reapply Harley Gloss as described above to keep surfaces
looking their best.
Polishing
Polishing molded-in-color body panels results in greater sur-
face gloss and a protective coating.
Apply Harley Glaze Polish and Sealant every six months or
as required to keep molded-in-color panels protected and
looking their best.
Clean and dry surfaces to be polished (see Washing).
Apply Harley Glaze Polish and Sealant to clean, slightly
dampened cloth or sponge and apply to surface with a light
overlapping motion. Make sure to cover all areas.
Let Harley Glaze Polish and Sealant dry to a haze and buff off
residue with a clean soft cloth or Harley Softcloth.
Minor Scratch Removal
To remove minor scratches from body panels follow the
instructions below.
1. To remove light surface scratches and rubs, use Harley
Swirl and Scratch Treatment as recommended.
2. Make sure Swirl and Scratch Treatment is applied with a
moist cloth and by hand (not by machine).
3. After scratch or rub has been repaired, polish surface
lightly with Harley Glaze.
NOTE
Black body panels are more prone to suffer permanent cos-
metic damage if attempts to remove scratches are overdone.
Major Scratches
There is no repair procedure for severely scratched surfaces.
Severely scratched body panels must be replaced.
2006 Buell P3: Maintenance
1.4
1-9