Specifications - Buell 2006 P3 Service Manual

HOME

SPECIFICATIONS

NOTE
Service wear limits are given as a guideline for measuring
components that are not new. For measurement specifica-
tions not given under SERVICE WEAR LIMITS, see NEW
COMPONENTS.
PRIMARY DRIVE ENGINE-TO-TRANSMISSION
Engine sprocket – number of teeth
Clutch sprocket – number of teeth
Ratio*
FINAL DRIVE (TRANSMISSION-TO-REAR WHEEL)
Transmission sprocket – number of teeth
Rear wheel sprocket – number of teeth
Secondary drive belt – number of teeth
Ratio
TRANSMISSION
Primary drive / transmission lubricant capacity
First gear (low)
Second gear
Third gear
Fourth gear
Fifth gear (high)
* Internal gear ratios indicate number of mainshaft revolutions required to drive output sprocket one revolution.
** Overall gear ratios indicate number of engine revolutions required to drive rear wheel one revolution.
Table 6-1. Primary Drive Specifications
ITEM
Table 6-2. Final Drive Specifications
ITEM
Table 6-3. Transmission Specifications
ITEM
OVERALL GEAR RATIOS**
NEW COMPONENTS
35
56
1.60:1
NEW COMPONENTS
27
80
139
2.96:1
NEW COMPONENTS
32 fl. oz. (946 ml)
12.74
8.77
6.79
5.60
4.74
2006 Buell P3: Drive/Transmission
6.1
SERVICE WEAR LIMITS
N/A
N/A
N/A
SERVICE WEAR LIMITS
N/A
Replace at 15,000 mi
(24,000 km)
Replace at 15,000 mi
(24,000 km)
N/A
SERVICE WEAR LIMITS
N/A
N/A
N/A
N/A
N/A
N/A
6-1