Connecting To A Wired Internet Network Automatically; Connecting To A Wired Internet Network Manually - Samsung KR-X14ATSCH-1 E-Manual

●
Wall-mounted LAN Outlet

Connecting to a Wired Internet Network Automatically

Network Network Settings
>
Automatically connect to an available network.
1.
Network type
Set the
2.
The TV attempts to connect to an available network. Once it is successful, you will see a
confirmation message. Select OK. If the attempt fails, try again, or connect manually.

Connecting to a Wired Internet Network Manually

Network Network Settings
>
With networks that require a static IP address, you will need to enter the IP address, subnet mask,
gateway, and DNS values manually to connect to the network. To get these values, contact your
Internet Service Provider (ISP).
"
Refer to the "Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IP
addresses.
1.
Network type
Set the
Network Settings
Select your network type.
Network type
Try Now
to Wired, and then select Connect.
to Wired, and then select Connect.
Wired
Connect
You can connect your
TV to the internet.