Connecting To A Wired Internet Network Automatically; Connecting To A Wired Internet Network Manually - Samsung js9800 E-Manual

Connecting to a Wired Internet Network Automatically

MENU
(MENU/123)
Automatically connect to an available network.
1.
Network Type
Set the
2.
The TV attempts to connect to an available network. Once successful, you will see a confirmation
message. Select OK. If the attempt fails, try again, or connect manually.

Connecting to a Wired Internet Network Manually

MENU
(MENU/123)
With networks that require a static IP address, you will need to enter the IP address, subnet mask,
gateway, and DNS values manually to connect to the network. To get these values, contact your
Internet Service Provider (ISP).
"
Refer to the "Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IP
addresses.
1.
Network Type
Set the
2.
Stop
Select when the TV attempts to connect to the network. Once the network connection has
been interrupted, select
3.
IP Settings
In the
Mask, Gateway, and
●
Use one of the following methods to enter the numerical values.
Set the numbers using the
Place a finger on the
the screen moves to the frame you want. Press the
use for Samsung Smart Control.
For general remote control, enter the numbers directly. (Availability depends on the specific
model and area.)
4.
The TV attempts to connect to the network again using the specified settings. A confirmation
message appears once a connection is established. Select OK.
"
The network connection speed may differ depending on the DNS server settings.
"
For details on the DNS server settings, contact your Internet service provider (ISP).
Network Network Settings
to Wired, and then press
Network Network Settings
to Wired, and then press
IP Settings.
IP setting
screen, set the
DNS Server values, and then select OK.
and
POINTER
button and move the Samsung Smart Control. The pointer on
Try Now
.
.
Enter manually, enter the
to
buttons on screen.
POINTER
IP Address, Subnet
button to select numbers. Only