Samsung LN40A500T1F User Manual

L5 series

Hide thumbs Also See for LN40A500T1F:

Manual (2 pages)

Quick setup manual (38 pages)

Table Of Contents

Table of Contents

Quick Links

Troubleshooting

Summary of Contents for Samsung LN40A500T1F

Page 1 If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLDWIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente. Country...
Page 2 On LCD models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.
Page 3: Table Of Contents
Choosing a Multi-Channel Sound (MTS) track ...31 ■ Automatic Volume Control ...32 ■ Setting the TV Speakers On/Off ...32 ■ Listening to the Sound of the Sub (PIP) Picture ...33 ■ Resetting the Sound Settings to the Factory Defaults ...33 Channel Control ■ Managing Channels ...34 ■...
Page 4: General Information
SRS TruSurround XT - SRS TruSurround XT provides a virtual surround system. Accessories Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. Remote Control & Batteries (AAA x 2)
Page 5: Viewing The Control Panel
Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. The product color and shape may vary depending on the model.
Page 6: Viewing The Connection Panel
Viewing the Connection Panel Use the connection panel jacks to connect A/V components that will be connected continuously, such as DVD players or a VCR. For more information on connecting equipment, see pages 6~11. The product color and shape may vary depending on the model.
Page 7: Remote Control
Remote Control You can use the remote control up to a distance of about 23 feet from the TV. 1 POWER Turns the TV on and off. 2 TV Selects the TV mode directly. 3 NUMERIC BUTTONS Press to directly select the channel.
Page 8: Installing Batteries In The Remote Control
Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).
Page 9: Connecting Cable Tv
TV. After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
Page 10: Connecting A Dvd Player Or Cable Box/Satellite Receiver (Set-Top Box) Via Hdmi
When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite receiver to confirm the HDMI version, then request an upgrade.
Page 11: Connecting A Dvd Player Or Cable Box/Satellite Receiver (Set-Top Box) Via Component Cables
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV. Connect a Component...
Page 12: Connecting A Vcr
Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6~7). Skip step 1 if you have not yet connected to an antenna or a cable system.
Page 13: Connecting A Digital Audio System
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV. Connect an Optical Cable between the “DIGITAL AUDIO OUT (OPTICAL)” jacks on the TV and the Digital Audio Input jacks on the Digital Audio System.
Page 14: Operation
“Store Demo” mode is only intended for use in retail environments. ➣ If the unit is accidentally set to “Store Demo” mode and you want to return ➣ to “Home Use” (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
Page 15: Changing Channels
Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTER button. If you have received a digital signal, the time will be set automatically. If not, see page 45 to set the clock.
Page 16: Adjusting The Volume
Press the INFO button on the remote control. The TV will display the channel, the type of sound, and the status of certain picture and sound settings. Press the INFO button once more or wait approximately 10 seconds and ➣...
Page 17: Using The Tools Button
Auto adjustment: see page 43 Memorizing the Channels Your TV can memorize and store all of the available channels for both “off-air” (Air) and “Cable” channels. After the available channels are memorized, use the CH channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding or deleting channels (Channel Lists).
Page 18 Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Auto Program”, then press the ENTER button. Press the ▲ or ▼ button to select the antenna connection, then press the ENTER button.
Page 19: To Select The Source
To Select the Source Use to select TV or other external input sources such as DVD players or Cable Box/Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. Press the MENU button to display the menu.
Page 20: Picture Control
Standard” instructions numbers 1 and 2. Press the ▲ or ▼ button to select “Backlight”, “Contrast”, “Brightness”, “Sharpness”, “Color” or “Tint(G/R)”, then press the ENTER Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button.
Page 21: Adjusting The Detailed Settings
Adjusting the Detailed Settings Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings. Activating Detailed Settings Press the MENU button to display the menu. Press the ENTER button to select “Picture”.
Page 22 ➣ 14. Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”. Press the ENTER 15. Press the ▲ or ▼ button to select “Red”, “Green” or “Blue” to change it. Press the ENTER button.
Page 23 18. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 19. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button. •...
Page 24: Resetting The Picture Settings To The Factory Defaults
(ie. DVD player) connected to the HDMI or Component IN jacks. 24. Press the ▲ or ▼ button to select “xvYCC”, then press the ENTER button. 25. Press the ▲ or ▼ button to select “Off” or “On”.
Page 25: Configuring Picture Options
TV comes with six screen size options, each designed to work best with specific types of video input. Your cable box or satellite receiver may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible.
Page 26 You can initialize the setting. HD (High Definition) ➣ 16:9 - 1080i/1080p (1920x1080), 720p (1280x720) Settings can be adjusted and stored for each external device you have connected to an input of the TV. ➣ Input Source ATV, AV, Component (480i, 480p) DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080P) Alternately, you can press the P.SIZE button on the remote control repeatedly...
Page 27 Setting the Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. Follow the “Activating Picture Options” instructions numbers 1 and 2.
Page 28 Blue Filter effect that is used to adjust the Color and Tint of video equipment such as DVD players, Home Theaters, etc.
Page 29: Viewing Picture-In-Picture
You can use the PIP feature to simultaneously watch the TV tuner (analog broadcasts only) and one external video source. (See page 33 to select the PIP picture sound.) This product has one built-in tuner, which does not allow PIP to function in the same mode.
Page 30 Press the ▲ or ▼ button to select “Air/Cable”, then press the ENTER button. Press the ▲ or ▼ button to select “Air” or “Cable”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
Page 31: Sound Control
Sound Control Changing the Sound Standard You can select the sound mode to best suit the programming you’re watching. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Sound”, then press the ENTER Press the ENTER button to select “Mode”.
Page 32: Setting The Trusurround Xt
Press the EXIT button to exit. Setting the TruSurround XT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers.
Page 33: Choosing Preferred Language
Press the ▲ or ▼ button to select “Multi-Track Sound”, then press the ENTER button. Press the ▲ or ▼ button to select a setting you want, then press the ENTER button. Press the EXIT button to exit. • Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.
Page 34: Automatic Volume Control
Press the ▲ or ▼ button to select “Sound”, then press the ENTER Press the ▲ or ▼ button to select “Auto Volume”, then press the ENTER button. Press the ▲ or ▼ button to set “Auto Volume”, “Off” or “On” then press the ENTER button.
Page 35: Listening To The Sound Of The Sub (Pip) Picture
Listening to the Sound of the Sub (PIP) Picture When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Sound”, then press the ENTER Press the ▲...
Page 36: Channel Control
Channel Control Managing Channels Using this menu, you can Add/Delete or set Favorite channels and use the program guide for digital broadcasts. Viewing All Channels Show all currently available channels. To use the Channel List function, first run “Auto Program” (see page 16).
Page 37: Erasing And Adding Channels
To Add (Restore) a channel back to the Added Channel List, follow steps ➣ 1-3 above, press the ▲ or ▼ button to select a channel to add, then press the TOOLS button. Press the ENTER Press the CH LIST button on the remote control to bring up the channel lists.
Page 38 Press the TOOLS button. Press the ▲ or ▼ button to select “Add to Favorite”, then press the ENTER button. The “♥” symbol will be displayed and the channel will be set as a favorite.
Page 39 If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To reserve a program, set the current time first. See pages 45~46. Reserved channels can only be set if they are in the “Channel List” (See page 34).
Page 40 ➣ Press the ENTER button. Modifying a viewing reservation To select a reservation item to be modified, press the ▲ or ▼ button and then press the TOOLS button. Press the ENTER button to select “Change Info”. Press the ▲/▼/◄/► buttons to change a reservation setting and then press the ENTER button.
Page 41 Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button. Press the ▲ or ▼ button to select the channel to be assigned a new name, then press the TOOLS button. Press the ▲ or ▼ button to select “Channel Name Edit”, then press the ENTER button.
Page 42: Clearing Scrambled Channels - Digital
Clearing Scrambled Channels - Digital The “Clear Scrambled Channel” function is used to filter out scrambled channels after “Auto Program” is completed. This process may take up to 20~30 minutes. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
Page 43: Checking The Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels.
Page 44: Pc Display
Display Modes If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video.
Page 45: Setting Up The Tv With Your Pc
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of the screen.
Page 46 Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. Press the ▲ or ▼ button to select “Screen”, then press the ENTER button. Press the ▲ or ▼ button to select “Image Reset”, then press the ENTER button. Press the EXIT button to exit. Coarse...
Page 47: Time Setting
Time Setting Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Option 1: Setting the Clock Manually Press the MENU button to display the menu.
Page 48 Press the ▲ or ▼ button to select “Auto”, then press the ENTER Press the ▲ or ▼ button to select “Time Zone”, then press the ENTER button. Press the ▲ or ▼ button to highlight the time zone for your local area, then press the ENTER button.
Page 49 Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes). Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER Press the ▲...
Page 50 Press the ▲ or ▼ button to select “Time”, then press the ENTER Three different On/Off Timer Settings can be made. Press the ▲ or ▼ button to select “Timer 1”, “Timer 2” or “Timer 3”, then press the ENTER button.
Page 51: Function Description
Press the EXIT button to exit. Using the V-Chip The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed.
Page 52 Press the EXIT button to exit. If you forget the PIN, press the remote-control buttons in the following ➣ sequence, which resets the pin to 0-0-0-0 : Power Off. → Mute → 8 → 2 → 4 → Power On. How to Enable/Disable the V-Chip Press the MENU button to display the menu.
Page 53 How to Set up Restrictions Using the TV Parental Guidelines First, set up a personal identification number (PIN) and enable the V-Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating.
Page 54 The MPAA rating system uses the Motion Picture Association of America (MPAA) system and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings).
Page 55 The “V-Chip” screen will appear. Press the ▲ or ▼ button to select “Canadian English”, then press the ENTER Press the ▲ or ▼ button to select a appropriate restriction. Press the ENTER button to activate the restriction selected. The “...
Page 56 18 ans+: Programming restricted to adults. • The V-Chip will automatically block any category that is “More restrictive”. ➣ For example, if you block 8 ans+ category, then 13 ans+, 16 ans+ and 18 ans+ will automatically be blocked also. button. button.
Page 57 How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”) If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: Press the ENTER button to select OK.
Page 58: Viewing Closed Captions (On-Screen Text Messages) - Analog
Viewing Closed Captions (On-Screen Text Messages) - Analog The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) Press the MENU button to display the menu.
Page 59: Viewing Closed Captions (On-Screen Text Messages) - Digital
Press the ▲ or ▼ button to select “Size”, then press the ENTER Press the ▲ or ▼ button to select the desired Caption option, then press the ENTER button. Press the ▲ or ▼ button to select the desired sub-menu options (see options below), then press ENTER Press the EXIT button to exit.
Page 60: Adjusting The Tv On/Off Melody Sound
Adjusting the TV On/Off Melody Sound A melody sound can be set to come on when the TV is powered On or Off. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER Press the ▲...
Page 61: Using The Energy Saving Feature
Using the Energy Saving Feature This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the "Energy Saving “ mode option to “High” to reduce eye fatigue as well as power consumption.
Page 62: Upgrading The Software
Upgrading the Software Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your TV.
Page 63: Self Diagnosis
Self diagnosis Picture Test If you think you have a picture problem, perform the picture test. Check the color pattern on the screen to see if the problem still exists. Press and hold the button for more than 5 seconds.
Page 64: About Anynet
Anynet + works when the AV device supporting Anynet + is in the Standby or On status. ➣ Anynet + supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type. ➣...
Page 65: Setting Up Anynet
Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when ➣ the TV is already on are not displayed in the device list. In this case, select the Searching Connections menu to search devices.
Page 66: Recording
➣ button works only while in the recordable state. ➣ You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet + devices only using the TV ➣ remote control. The TV remote control may not work under certain conditions. In this case, reselect the Anynet + device.
Page 67: Listening Through A Receiver (Home Theater)
➣ language) menus. If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the power cord or a ➣ power failure), the “TV Speaker” may be set to “Off” when you turn the TV on again. (see page 32)
Page 68: Appendix
Appendix Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG. Problem Poor picture. Poor sound quality. No picture or sound.
Page 69 This TFT LCD panel uses a panel consisting of sub pixels (6 220 800) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Page 70: Installing The Stand
TV. Fasten two screws at position 1 and then fasten two screws at position 2. Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to ➣...
Page 71: Auto Wall-Mount Adjustment (Sold Separately)
Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to the saved position. You can move the wall mount to one of the 3 pre-set positions by pressing the Red (Position 1), Green (Position 2) ➣ or Yellow (Position 3) buttons.
Page 72: Wall Mount Kit Specifications (Vesa)
When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. ➣ Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set. ➣...
Page 73: Using The Anti-Theft Kensington Lock
The location of the Kensington Lock may be different depending on its model. ➣ Insert the locking device into the Kensington slot on the LCD TV (Figure 1) and turn it in the locking direction (Figure 2). Connect the Kensington Lock cable.
Page 74: Securing The Tv To The Wall
Securing the TV to the Wall Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not 주의 hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer.
Page 75: Specifications
Design and specifications are subject to change without prior notice. ➣ This device is a Class B digital apparatus. ➣ For the power supply and Power Consumption, refer to the label attached to the product. ➣ LN40A00T1F 40 inches 1920 x 1080 @ 60 Hz 10W x 2 38.2 X 3.4 X 24.7 inches...
Page 76: Dimensions
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. © 2008 Samsung Electronics America, Inc.
Page 77 NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. © 2008 Samsung Electronics America, Inc.
Page 78 (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs;...
Page 79 But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Page 80 How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.
Page 81 (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs;...
Page 82 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library.
Page 83 Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.
Page 84 It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims;...
Page 85 General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.

This manual is also suitable for:

Ln46a500t1f Ln40a500

Samsung LN40A500T1F User Manual

General Information

Connections

Operation

Picture Control

Sound Control

Channel Control

PC Display

Time Setting

Function Description

About Anynet

Appendix

Quick Links

Troubleshooting

Related Manuals for Samsung LN40A500T1F

Summary of Contents for Samsung LN40A500T1F

This manual is also suitable for:

Table of Contents