Anynet+ (Hdmi-Cec) Isn't Working - Samsung KR-X14ATSCH-1 E-Manual

Anynet+ (HDMI-CEC) isn't working.

There is something
wrong with the TV.
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
The message "Connecting
to Anynet+ device..."
or "Disconnecting from
Anynet+ device" appears
on the screen.
The Anynet+ device
won't play.
The connected device is
not displayed.
The TV audio is not
being played through the
receiver.
Try this!
Confirm that the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
Check if the power cord of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
System
Go to and see if
Check whether the TV remote control is in TV mode.
Check whether the remote control is Anynet+ compatible.
Anynet+ may not function when some other functions are active, including ... (Channel
Search, Smart Hub, Start Up, etc.)
If you have disconnected and then reconnected the HDMI cable, scan for devices again
or turn your TV off and on.
Check if the Anynet+ device is properly connected to the TV and then navigate to the
System
menu to see if
Once verified, press the
(HDMI-CEC)
from the list and then a device.
"
On the Samsung Smart Control, press the
편메뉴
on the on-screen remote screen.
View TV
Select from the Anynet+ menu.
Select a non-Anynet+ device from the
You cannot use the remote control when you are configuring Anynet+ or switching
to a viewing mode. Use the remote control after the TV has completed the Anynet+
configuration or has switched to a viewing mode.
You cannot use the play function when
Check whether the device supports Anynet+.
Check whether the HDMI cable is properly connected.
System
Go to and see if
Scan for Anynet+ devices again.
Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the
device is connected to your TV with an HDMI cable. Some HDMI cables may not
support Anynet+.
If the connection is terminated because there has been a power failure or the HDMI
cable has been disconnected, please scan for the device again.
Connect an optical cable to the TV and the receiver.
ARC enables digital sound to be outputted via the HDMI (ARC) port.
However, ARC is only available when the TV is connected to an audio receiver that
supports ARC.
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
간편메뉴
button to display the Tools list. Select
Source
Setup
Anynet+ (HDMI-CEC)
has been set to On.
is set to On.
버튼더보기
button. You can select the
list.
is in progress.
has been set to On.
Anynet+
간