Pairing The Samsung Smart Control; Reconnecting The Samsung Smart Control - Samsung KR-X14ATSCH-1 E-Manual

Pairing the Samsung Smart Control

"
The LED H5500, H6300, H6350, and H6800 series models are not provided the Samsung Smart Control.
To use the Samsung Smart Control with the TV, you must first pair it to the TV via Bluetooth.
"
The Samsung Smart Control can only connect to one TV at a time.
1.
While the TV is not being turned on, point Samsung Smart Control at the remote control sensor
of the TV and press the
"
The remote control receiver's location may vary depending on the model.
2.
When the TV turns on, the Samsung Smart Control will be connected to the TV automatically.

Reconnecting the Samsung Smart Control

If the Samsung Smart Control stops operating or works abnormally, replace the batteries as this
may be due to insufficient battery power. If the problem persists, the Samsung Smart Control restore
pairing with the TV.
1.
Press both the
"
You have to control Samsung Smart Control apart from TV within 30cm ~ 4m. And, you must place
Samsung Smart Control toward to TV's remote control receiver.
2.
Connection image is appeared on the screen. And then, Samsung Smart Control is connecting to
TV automatically.
TV
button to turn the TV on.
복귀
button and the
<Connection attempt and completion icons>
방송안내
button simultaneously for more than 3 seconds.