Samsung KR-X14ATSCH-1 E-Manual page 52

2.
Stop
Select when the TV attempts to connect to the network. Once the network connection has
been interrupted, select
Network Settings
Connection verification cancelled.
Wired network connection test is stopped.
Change Network
3.
IP Settings
In the
IP Settings
IP Setting
IP Address
Subnet Mask
Gateway
DNS Setting
DNS Server
OK
4.
IP Address. When the IP Address entry window appears, enter three digits into each field
Select
on the IP Address line. When done, select OK.
"
On the Samsung Smart Control, press the
On-Screen Remote to enter numbers.
5.
Repeat the process for
6.
The TV attempts to connect to the network again using the settings you entered. Once it has
established the connection, it displays a confirmation message. Select OK.
"
The network connection speed may differ depending on the DNS server settings.
"
For details on the DNS server settings, contact your Internet service provider (ISP).
IP Settings.
IP Settings Retry
IP Setting
screen, set
Enter manually
0.0.0.0
0.0.0.0
0.0.0.0
Enter manually
0.0.0.0
Cancel
Subnet Mask, Gateway, and
Close
to Enter Manually.
버튼더보기
button. The On-Screen Remote appears. Use the
DNS Server. When done, select OK.