Controlling External Devices With The Tv Remote; Using The Universal Remote; Setting Up The Universal Remote Control - Samsung KR-X14ATSCH-1 E-Manual

Controlling External Devices with the TV Remote -

Using the Universal Remote

System Universal Remote Setup
>
The universal remote control feature lets you control cable boxes, Blu-ray players, home theaters, and
other third-party external devices connected to the TV using the TV's remote control. To use the TV's
remote control as a universal remote, you must first connect the IR extender cable to the TV.
"
You can also use the Anynet+ (HDMI-CEC) function to operate external Samsung devices with your TV's
remote control without any additional setup. Refer to the "Using Anynet+ (HDMI-CEC)" section for more
information.
"
Certain external devices connected to the TV may not support the universal remote feature.

Setting Up the Universal Remote Control

Before connecting any external devices and cables to the TV, first verify the model number of the TV
you purchased. A sticker containing the model number is attached to the back of the TV.
"
The connection method varies depending on the model.
To use the TV remote as a universal remote, connect the IR extender cable (included) to the TV's IR
output connector as shown in the diagram, and then position the transmitter end within 10 cm of the
external device's receiver, pointing in the direction of the receiver.
"
The color and design of the IR extension cable may vary depending on the model.
Refer to the diagram and connect the IR extension cable to the TV's IR output connector, and place the
transmitter end within 10 cm of the external device's receiver pointing in the direction of the remote
receiver. However, there must be no obstacles between the IR extension cable and the external device.
The presence of obstacles interferes with the transmission of the remote control signal.
"
When you use an external device registered with the Universal Remote Control on the Samsung Smart
Control, you can use the external device without connecting an IR extension cable. However, if you want to
use an external device using Motion Control or Voice Control, be sure to connect an IR extension cable.
Try Now